The following are just a few rules of wedding band etiquette that you can follow to make your special day better, more enjoyable, and less stressful. While some of the rules of etiquette might seem obvious, you would be amazed at how many people make wrong choices.

• Wedding bands should be a gift from one person to another, a special ring chosen with the future bride and/or groom in mind. Therefore, if one party had purchased wedding bands for a prior relationship that fell apart, the old set should never be used for the upcoming ceremony, no matter what.

• Traditionally, the man in the relationship picks out and pays for his fiancé’s engagement ring. While she might provide the correct ring size and give him some ideas as to preferred style, type of metal, and cut of the diamond, ultimately, the man makes the decision based on his budget.

• If the couple getting married is more contemporary, they may shop for the engagement and wedding rings together. However, the bride’s ring is considered the lead, meaning the couple generally chooses the man’s ring to match perfectly or simply a wedding ring that complements the style of the woman’s ring.

• Diamonds are in fact a woman’s best friend but today, engagement rings are designed with a variety of stones. Therefore, the engagement ring could be adorned solely with a diamond, it could have diamonds of several cuts, the ring might be made with a diamond and another precious gem, or the bride may prefer an engagement ring made without a diamond, choosing her favorite precious gem instead.

• Many women wear other rings and various pieces of jewelry along with the engagement ring so if she prefers white gold to yellow gold, the engagement ring should match her normal preference. If the bride to be has dainty hands, chances are she wears smaller pieces of jewelry so again, the engagement ring should not be too large or gaudy.

• Although many women fail to return an engagement ring if wedding plans fall through, proper etiquette states that the ring is a gift based on a promise of marriage so if the marriage never happens for whatever reason, the woman’s ring is to be returned to the man.

• In Western culture, the bride’s engagement ring is worn on her left hand index finger after being proposed to but during the wedding ceremony, she would move the ring to her right hand index finger. Once the wedding band is placed on her left hand, the engagement ring would then be returned to that same hand, sitting in front of the wedding ring. The best way to remember this is after becoming husband and wife, the woman wants the wedding band to be located nearest her heart.

• Sometimes, the man will present his fiancé with a family heirloom for an engagement ring but together, it would need to be determined if she would wear the ring for life or if it would be worn until their future child gets married, at which time the ring would be passed down to another generation.

• Although this is not done as often as it once was, a woman can present her new fiancé with a signet ring after receiving the engagement ring.

• For the wedding bands, generally the man pays for the woman’s engagement and wedding band whereas the woman pays for the man’s wedding band. However, some couples will purchase bands together but either way is acceptable.

When shopping for wedding bands, you obviously want the type of metal most appealing and perhaps even bands with beautiful diamonds but you need to make sure the bands fit. As you look around, you will discover that you have a choice of three primary types of bands to include the following:

Mfit Wedding Bands

The Mfit collection is actually unique, an innovative solution to the standard type of wedding band. Using a patented structure, bands are designed to put minimal pressure on the finger and skin, which makes for a luxurious look and feel. The Mfit technology can be applied to the inside of any wedding band, creating the highest level of comfort but without changing the appearance or structure of the ring.

The technology used for Mfit wedding bands was first introduced in 2003 and today, it has become a popular option for people around the world. With air release tunnels, the finger can breathe better. Other benefits include the low pressure points, easy on and off movement, elimination of dirt accumulation, and 100% comfort.

Comfort Fit Wedding Bands

Comfort Fit bands are specially designed so they are rounded on the inside. With this design, the ring slides on and off the finger easily but it also sits on the finger more comfortably. In fact, people that purchase a Comfort Fit wedding band agree that they forget they even have a ring on because it feels so natural.

Within the Comfort Fit band category, you have a number of options. For example, there is the “light Comfort Fit”, which is slightly rounded on the inside, the “heavy Comfort Fit”, a thicker type of ring, on the inside and the outside, and then there is the “regular Comfort Fit”, which falls in between the other two.

Rings known as Comfort Fit are also referred to as “internally round”. These rings are ideal for people that remove wedding bands often. Additionally, all of the Comfort Fit wedding bands actually have greater metal content so you would expect to pay a little more than over a standard fit ring.

Standard Fit Wedding Bands

Rings in the “standard fit” category are the traditional design that has been around for years. These wedding bands are made with a straight interior and without the additional metal dome. As a result, you have a comfortable fit but nothing like you would get with Comfort Fit or Mift rings.

Mfit, Comfort Fit, and standard fit wedding bands come in different metal options such as silver, gold (yellow and white), platinum, and titanium and of different karats, to include 10, 12, 14, and up. Therefore, we recommend that you try on the different types of wedding bands before buying, finding the one that feels best for your hand.

Wedding rings have conventionally been the woman’s domain. However, this trend is fast changing. One of the main reasons for this changing trend is that today men have accepted the notion of wearing a wedding ring.

The wedding ring wearing trend among men has undergone many changes. Today men’s wedding rings are all about style and comfort. Let’s see some of the changes in wedding ring wearing trends:

Today, men are more open to the idea because there are new trends such as one-size-fits- all wedding bands. These types of rings are fit for men who are engaged in any kind of occupation like construction, or if you go to the gym regularly. While involved in such activities there would be a lot of wear and tear on the ring. It is, therefore, recommended that you avoid gold rings and wear platinum rings instead. This would give you great durability.

The designers have also contributed a lot in changing the wedding ring wearing trend. Today, jewelry designers are using ergonomics and creating rings that are both sustainable and comfortable. They have very wisely innovated the designing of the ring. They are making rings with curved interiors to provide that extra comfort.

The most notable change in the wedding ring wearing trend amongst men is that many men are open to the idea of sporting a diamond ring. Today many men prefer wearing diamond rings over other stones. This is mainly because the style, sophistication and spark of diamonds have attracted men. After watches, diamond rings are the leading piece of jewelry for men.

With changing trends in wedding ring wearing among men, gold rings are increasingly passé. Platinum and silver rings are the latest trends. This is mainly because platinum rings are very soft and lightweight, and they provide ultra comfort to fingers. Also, some very fine quality designer platinum wedding rings can attract a lot of attention.

Buying a good quality wedding ring can be a very tedious task. If you want to shop for your perfect wedding ring, you can go online. Over the Internet, you can find many retailers, and one of the best among them is Mfitdesign. Mfit is an online jewelry retail shop that specializes in providing some of the most technologically advanced wedding rings for men. Their unique ring designs have air tunnels. This helps your skin to breathe and helps to reduce dirt collection on the inside of the ring. Mfit also provides one of the best customer services around. Style, trend and comfort are some of the features that you can get if you buy your wedding ring from Mfitdesign.

Fashion rings, in recent times, have become one of the fastest growing types of fashion jewelry. Over the years the pattern, designs and material used in wedding rings have undergone lot of changes. With worldwide popular celebrities, like David Beckham, flaunting their wedding rings, there has been a tremendous rise in its popularity. However, today’s wedding rings are not popular amongst only the celebrities, but common people are also wearing their wedding ring.

Let’s look at the changing trends in men’s wedding rings:

Previously, many men wore their wedding rings only for the ceremony then they would remove it in a few days since the ill-fitting ring created many problems like itching. Today, many designers are designing men’s wedding rings and they are available in various sizes. The basic motto of this is to provide men with maximum comfort. Today, men’s wedding rings are larger, wider and thicker.

The metals used in making men’s wedding rings have also undergone many changes. Traditionally, men’s wedding rings were made only of gold, but today many other metals have been used. Metals like silver, stainless steel, titanium and platinum are some of the metals that are used in making trendy men’s wedding rings. These rings are perfect for men who dislike taking their ring on and off. Apart from these metals, some of the designer jewelry brands also offer rings made of tungsten. These rings, though comfortable, are very strong and it is hard to resize it.

Today many men are also seen sporting diamond wedding rings. Diamond rings were previously worn by women, but now even men are wearing them as fashion jewelry.

The designing of men’s rings has also undergone many changes. Previously, men’s rings had only limited designs like simple stripes or lines. However, the trend is changing so fast today and men are wearing square shaped rings, right-angled ones and other geometrical shapes.

If you are looking for a fashionable wedding ring, you can find them online. One of the best online jewelry retailers is Mitdesign. Mfit is an Internet based jewelry retail outlet that provides some of the most innovative designs for men’s wedding rings. Their unique designs aim to provide utmost comfort to the wearer of the ring. Mfit offers your some of the best-crafted wedding rings that keep in pace with the latest fashion and trends, and provide comfort at the same time. Their unique ring design are very easy on your fingers and do not exert any pressure. All the Mfit rings have air tunnels that not only help your skin breathe, but it also reduces dirt accumulation. One of the reasons why it is a favorite online jewelry retail outlet is they provide excellent design and style without compromising on the comfort factor.

Jewelry is not just worn around the neck or on earlobes these days; it can be worn on the eyebrow, nose, tongue or any other part of the body that suits the wearer.

Many women believe that every outfit must have a perfect jewelry combination to complement it. They enjoy wearing jewelry everyday and like having lots of small pieces of jewelry such as rings, bracelets, earrings, pendants, necklaces, brooches and anklets to go with their outfits. It has become a necessity to change jewelry everyday. The right piece of jewelry can have a positive impact on your image amongst other people.

However, fashion doesn’t remain constant. Like clothes, jewelry fashion is also dynamic. It keeps changing every season. What is “in” today may not be in fashion tomorrow. Therefore, to keep up with changing trends, women are always buying new jewelry.

In the race to be fashionable, most women forget to be comfortable. Comfort is the most important criteria a piece of jewelry should be rated on, if it is intended to be worn for long hours.

You might have seen people constantly fidgeting with their rings or earrings. This looks bad and makes people seem awkward. If you are uncomfortable, it’ll show on your face and even the most expensive piece of jewelry won’t be able to make you look good.

Most jewelry is uncomfortable to wear over a long period of time. This is because none of the jewelry makers makes comfortable jewelry.

Mfitdesign is an Internet based jewelry store that specializes in making comfortable jewelry. The patented Mfit technology is unique. It is an innovative breakthrough in ring comfort.

Mfit rings provide minimal pressure points and allow the skin to breathe through air tunnels. The air tunnels also prevent accumulation of dirt. Thus, you don’t need to worry about cleaning your precious jewelry. The technology can be applied to all ring types because it is located on the inside of the ring. Rings for both men and women provide total comfort.

The jewelry concept of Mfit is based on comfort and is unique. It has never been attempted by anyone before. Other than fashion jewelry, they also offer engagement rings (marriage proposal rings), wedding rings (marriage rings, diamond wedding rings, and men’s wedding band) and diamond bridal sets with bridal rings.

Mfit rings are so comfortable that they can be worn and removed with perfect ease. You will be so comfortable wearing them that, after trying Mfits unique ring designs, you will not wear jewelry from other jewelers ever again.

Mfit jewelry collection is truly the epitome of beauty and comfort.

An engagement ring denotes how far you can go to impress your bride-to-be. Hence, it is very important that you don’t compromise on the quality of the engagement ring and settle for anything less than the best. Nothing conveys the feeling of love, warmth and commitment better than gold.

Since olden times, weddings rings have been considered a symbol of love and linked to the bestowal of ‘earnest money.’ As per the prayer book of Edward VI, after the words, ‘with this ring I thee wed’ follow the words, ‘This gold and silver I give thee.’ At this point, the groom is supposed to give a leather purse, filled with silver and gold coins to the bride. The royal and expensive quality of gold makes it superior to titanium or any other metals. Titanium is comparatively less expensive than gold and holds less monetary value. For some people, titanium’s low cost makes it less prestigious as a wedding band.

It is not possible to make a prong setting with titanium. Hence, you can’t use it to make a traditional-looking wedding engagement ring unless the prong setting is made from a different metal and then riveted onto the titanium.

In comparison to titanium, platinum or any other trendy metal rings, gold rings appear more elegant and classy. If you wish to buy a fancy diamond ring which will complement the wedding band, titanium may not be a good option for you. On the other hand, gold, especially white gold, with its simplistic style, will complement the diamond ring and match every outfit flawlessly.

Another disadvantage of titanium is that it is very difficult to modify titanium rings. Titanium is a very strong element and can’t be soldered. Hence, if your ring is too large to fit, it is impossible to alter its size and make it smaller. On the other hand, if your ring is too small to fit your finger, the only option you have is to remove the material from the interior part of the band to increase its size and make it slightly bigger. On the other hand, gold is the ultimate choice, when it comes to making comfort rings.

White gold is not only lighter in weight, but is also durable and stronger. Gold has a scratch-resistant property, which enables the ring to maintain a flawless appearance even under strenuous circumstances. Unlike gold rings, titanium rings can easily show signs of scratching and wearing.

In comparison to gold, titanium takes on a dull luster. Hence, it is relatively less shiny.

Because of all these reasons, gold is still the most preferred choice when it comes to buying engagement or wedding rings.

Mfitdesign.com is an online jewelry retailer, concerned with providing its clientele with a variety of unique Mfit comfort technology ring designs. Each of its products is sold only after it has undergone extensive testing.

Mfit rings are an ideal choice for people with a discerning taste for fashion. These rings are not only easy to slide on and off, but also have minimal pressure points to ensure total and complete comfort.

1. Take your partner for a walk on a beach or in a park. Get down on one knee and pop the question.
2. Another traditional way to propose is to hide the diamond engagement ring in a cake or glass of champagne. Your partner will discover the ring on her own.
3. A much-used method is to spell out “Will you marry me?” on a scrabble board while playing a game and present the ring to her.
4. For a very traditional approach, you could simply ask the girl’s father for her hand. You could ask the girl in private at a family gathering and if the answer is yes, announce it to everyone.

If you are more adventurous and daring type, then you could try to pull off something completely new and unique that you and your partner will remember for a long time to come. Here are some ideas you could use:

1. You can get an airplane to sky write your proposal. Do it on a day you go for a boat ride or family picnic. Present her the ring as soon as she sees the writing in the sky.
2. If both of you are the sporty type, you could have your message displayed on the scoreboard at half time.
3. You could create a web page of her name with your proposal. Then sit down with her to surf the Internet. After one or two web sites, type in the name of your proposal web site.
4. Arrange a dinner at a Chinese restaurant and get the waiter to give her a special fortune cookie with, “Will you marry me?” inside.

All these proposal methods involve taking your partner by surprise. The man has to look for the ring all by himself. Imagine putting together an elaborate proposal only to be told by your partner that she doesn’t like the engagement ring. Sometimes, women are disappointed with the engagement ring they receive and prefer to be involved in the ring shopping process. You could buy the ring from a jewelry store or through an Internet retailer.

Since an engagement ring is a piece of jewelry that your partner will wear for the rest of her life, it must be comfortable.

Mfitdesign is a unique online jewelry store that focuses on making comfortable jewelry. The comfort fit engagement rings and wedding bands are easy to wear and take off.

Mfit jewelry collection is an innovative breakthrough in ring comfort. The innovative rings provide minimal pressure points and allow the skin to breathe through air tunnels. Mfit provides its customers with a superior personalized service experience.

A groom will only cherish the wedding band if there is a high level of comfort in that wedding band. Therefore, the notion of comfort needs to be given prime importance when choosing a wedding ring for the groom.

The following are the three things which you need to consider when determining the comfort level of the wedding band.

Material used:
The material used to make the wedding ring is a very vital thing to consider when buying a comfortable wedding band.

The shape of the ring:
In order to make your wedding ring a comfortable ring, it is very important that you give importance to the shape of the ring. Many rings are slightly curved on the inside so that they conform to the finger rather than fitting flat on the inside. Just because the ring is round in shape, doesn’t implicate that it is rounded on the outer side too- it can be quite flat. Another great option is a soft fit ring. This ring has gently curved edges which are not fully curved inside the surface in the ring.

Width of the ring:
Just like the shape, the size and length of the ring should also be taken into consideration. The width of a man’s wedding ring is measured in millimeters. Men with longer fingers often choose a slightly wider ring. However, men with slender fingers often choose a narrow ring. The smallest rings are 3 mm in width, whereas the largest rings are 8mm. It is better to purchase a ring that is on the larger side, somewhere between 5-6 mm.

Buying a wedding ring is an expensive investment and it is, therefore, necessary that when you go out to buy your wedding ring you ensure that you get the best deal for the money you pay. It is advisable that you buy your wedding ring from a jewelry shop to ensure that you get a good quality piece. You can find good jewelry retailers online.

One of the best online jewelry retailers is mfitdesign. It is an online shop that is focused on providing superior quality with rings offering utmost comfort. They provide some of the most innovative designs in wedding rings and aim to provide maximum comfort. You would surely love their patented designs.

Mfit has revolutionized ring design. Their innovative designs provide minimal pressure points. This allows your skin to breathe. The air tunnels minimize dirt accumulation.
Research has revealed that comfort is important for jewelry wearers. Mfitdesign provides exactly that. If you are looking for a wedding ring with superior design then you must visit the Mfitdesign web site and check out their range of rings.

Celebrities definitely know how to splurge when it comes to engagement rings and wedding rings. Celebrity engagement rings range from customized rings to antique rings; however, the common attribute is the exceptional carat size. Here are some unique wedding rings that were in the news, thanks to their celebrity owners:

When Lady Diana Spencer agreed to become Princess Diana, she wore an 18- carat deep blue oval sapphire circled by 14 diamonds. The ring was fit for a princess.

The ring of Camilla Bowles Parker has an art deco design with an emerald cut diamond and small baguette diamonds on the sides.

Joe DiMaggio presented Marilyn Monroe with a platinum eternity band set with 36 baguette diamonds when they eloped.

John F. Kennedy gave Jackie Kennedy a modest 3- carat emerald set with three additional carats of diamond accents when she said yes to him.

When Jennifer Lopez was engaged to Ben Affleck, she wore a 6- carat radiant shaped pink diamond ring. The stone alone cost $3 million.

Mena Suvari helped her husband with the design of her wedding ring. Instead of a traditional diamond ring, she had her ring designed around her birthstones: amethysts and citrines. The stones were set in an asymmetrical pattern around a gold band.

Beyonce Knowles wears a stunning 18- carat diamond wedding ring. The rock is massive and flawless. It is set in platinum and valued at approximately $5 million.

While most celebrities wear a 4 to 5 carat ring, Michael Douglas presented Catherine Zeta Jones with a 10- carat marquise diamond ring.

When Brad Pitt and Jennifer Aniston got married, Brad designed their wedding bands himself. The bands were in white gold with 0.8 carat of diamonds.

When Guy Ritchie married Madonna, he gave her an Edwardian platinum ring, which had a decorative band and three large stones to symbolize their family.

Courtney Cox and David Arquette have “A deal’s a deal” inscribed inside their wedding rings.

Many brides-to-be insist on getting celebrity wedding rings to emphasize romantic love; however, it is not easy for everyone to buy what their favorite celebrities wear. If you are among the people who would like their wedding rings to be similar to a celebrity’s, don’t worry because at Mfitdesign you can use a revolutionary diamond selection tool for customizing the perfect engagement ring with certified diamonds.

Mfit Technology is based on comfort. They make the most comfortable rings. You get the best styles with unequaled comfort.